Canceling Transmission On A Message Awaiting Transmission - Furuno Felcom 15 Operator's Manual

4. INMARSAT C COMMUNICATIONS
Note: When an e-mail with attachment is sent, the file volume increases by
7. To transmit the message to a station registered on the station list, follow from
step 12 on page 4-5. To transmit to a station not listed on the station list,
follow from step 4 on page 4-9.
4.1.4

Canceling transmission on a message awaiting transmission

As noted earlier a transmit message is held in the buffer, usually until it is
transmitted satisfactorily. To cancel transmission on a message held in the buffer,
do the following:
1. Press the [F3] key to display the Transmit menu.
2. Press the [2] key to display the Cancel screen.
File
---- * ---------+---------+---------+---------+---------+---------+---------<
TELEX
Send status
Waiting: Waiting to transmit message.
Sending: Now sending message.
Fail:
Rejected: Message rejected by LES.
Pending: LES circuits occupied.
3. Press the [↑] or [ ] key to choose the message you want to cancel.
4-16
1.5 times because of MIME coding. In this case, you can do the
following to lower toll charges:
a) Select file to attach from Message File.
b) Choose DATA from Code.
Edit Transmit EGC
Transmit
1. Transmit Message
2. Cancel
Message File
edit_msg.001
No. Station
01
25 Char.
Failed transmission
Reports Logs Options
<[1] UNTITLED1>
Cancel
Priority
Normal
LES
SANTA PAUL
[ Line 2/ 2 Col.
Cancel screen
Setup Position StopAlarm
Send Status Delivery
Waiting
1 ] [Insert ]