Furuno Felcom 15 Operator's Manual page 26

1. OPERATIONAL OVERVIEW
(3) Terminal unit status
IDLE
IDLE (PENDING)
SENDING
RECEIVING
LOGIN
LOGOUT
DISTRESS ALERT
Data Report
TESTING
TEST SETUP
SCANNING
EGC RECEIVER
(Reverse video)
Delivery Status Req.
Forced Clearing
(4a) Communication status
CALLING
WAITING FOR ACKNOWLEDGEMENT Waiting for acknowledgement from
RECEIVING EGC MESSAGE
WAITING FOR BACKOFF
Successful Login.
Login failed.
Successful Logout
Logout failed.
Successful Distress Alert.
Distress Alert Failed
Successful Forced Clearing.
Forced Clearing Failed.
SENDING MESSAGE PACKETS.
WAITING FOR ACKNOWLEDGEMENT Waiting for acknowledgement from LES
Successful sending to LES.
Sending message failed.
Call rejected.
Call pending.
Received Call.
Received Call(ITA2).
RECEIVING MESSAGE PACKETS
CLEARING
Successful receiving.
Receiving failed.
Successful Data Report.
Data Report failure.
PV TEST CALL is rejected.
1-10
Idle (awaiting receiving, awaiting transmitting)
Awaiting reply from LES
Sending
Receiving
Logged in with NCS
Logging out with NCS
When own vessel is transmitting the distress alert
Sending data report
Performance Verification (PV) testing
Requesting PV testing
NCS scanning
EGC-only receiver operation
Transmitting delivery status request
Stopping receiving, transmitting, or scanning
Now calling
LES.
Now receiving EGC message
Waiting to transmit data report
Login was successful
Login failed
Logout was successful
Logout failed
Distress alert successfully
Distress alert could not be transmitted.
Forced clearing successful
Forced clearing unsuccessful
Sending TX message packets
Message successfully sent to LES
Message could not be sent to LES
LES rejected your message
LES temporarily suspending
communications
Call received from LES
Call(ITA2) received from LES
Receiving message packets
Clearing TX sequence
You successfully received message
You could not receive message
Data report successfully sent.
Data report could not be sent.
PV test call rejected by NCS