Editing The Station List - Furuno Felcom 15 Operator's Manual

2. SYSTEM INITIALIZATION
Procedure for E-mail
1. Press the [ ] key to choose E-mail Address.
2. Press the [Enter] key to open the e-mail address entry window.
3. Enter recipient's e-mail address.
4. Press the [Enter] key to close the window.
5. Press the [ ] to choose Remarks.
6. Press the [Enter] key.
7. Enter remarks, using up to 20 characters.
8. Press the [Enter] key to close the window.
9. Press the [Esc] key to return to the station list.
10. To enter another "E-mail" station, repeat the procedure from step 4 on page
2-29.
11. Press the [Esc] key three times to return to the standby display.
2.7.2

Editing the station list

1. Press [F8], [9] and [1] to display the Station List.
File
Note: You may sort the list by group name, station name or communication
2. Press the [ ] or [ ] key to choose a station and then press the [Enter] key.
2-32
Edit Transmit EGC
Setup
Configuration
Group Station Name Type
abc E-Mail
01
xyz E-Mail
02
Seagull TELEX
03
04
05
06
07
08
Page Up, Page Down: Move
Sort (Ctrl+G: Group, Ctrl+N: Station Name, Ctrl+T: Type)
type as follows:
Group name: Each press of [Ctrl] + [G] sorts the list by group name,
ascending or descending order.
Station name: Each press of [Ctrl] + [N] sorts the list by station name,
in ascending or descending order.
Comm. type: Each press of [Ctrl] + [T] sorts the list by
communication type, in ascending or descending order.
Reports Logs Options
Station List
Code ID / Address
abc@ furuno.co.jp
xyz@ furuno.co.jp
584 463609999
Ctrl+P: Print
Station list
Setup Position StopAlarm