Furuno Felcom 15 Operator's Manual page 37

23. Press the [Enter] key to open the EGC output port options window.
System Date & Time
IMN
MES Operation Mode
Nav Port
Active Port
Message Output Port
EGC Output Port
9. Configuration
Network Setup
Command Window
System setup menu, EGC output port options window
24. Press the [ ] or [ ] key to choose the terminal unit where to route receive
EGC messages; INT, main terminal; INT+EXT, main and auxiliary terminals.
25. Press the [Enter] key to close the window.
26. Press the [Esc] key to open the update window.
See paragraph 2.1.3
Not used.
27. Yes is selected; press the [Enter] key to update system settings.
28. Press the [Esc] key to return to the standby display.
Setup
System Setup
01:53 02-02-25 (YY-MM-DD)
INMARSAT-C
OFF
INT
INT
INT
INT+EXT
Setup
System Date & Time
IMN
MES Operation Mode
Nav Port
Active Port
Message Output Port
EGC Output Port
9. Configuration
Network Setup
Command Window
System setup menu, update window
2. SYSTEM INITIALIZATION
System Setup
01:53 02-02-25 (YY-MM-DD)
INMARSAT-C
OFF
INT
Update
INT
INT
Yes No
2-5