Slide-In Labels - Honeywell Fire-Lite Alarms ES-200X Manual

Carefully cut along the outside of each label. Identify Function (F1-F4) keys as desired and slide the labels into the keypad. Starting at
the center of the keypad next to the Function Keys, slide each label into the groove towards the outer edge. Function Keys F1 and F3 are
not programmable in Canadian applications. Those keys must use the pre-printed labels below.
ES-200X Series Manual — P/N LS10131-000FL-E:C 7/25/2018

Slide-in Labels

Figure 1.1 Slide-in Labels
ALARM SIGNAL
ACTIVATION
ALARM SYSTEM
CANCEL
ACTIVATION DU
SIGNAL D'ALARME
Figure 1.2 Slide-in Labels for Canadian Applications
TWO-STAGE BYPASS
DÉROGATION EN
DEUX ÉTAPES
163