Backlash Compensation Function; Backlash Compensation Function - Mitsubishi Electric SV13/22 Programming Manual

8. AUXILIARY AND APPLIED FUNCTIONS
8.3

Backlash Compensation Function

Downloaded from ManualsNet.com
The backlash compensation function compensates for the backlash amount in the
mechanical system. When the backlash compensation amount is set, extra pulses
equivalent to the backlash compensation amount are output after a change in
travel direction resulting from positioning control, JOG operation, or manual pulse
generator operation.
(1) Setting the backlash compensation amount
The backlash compensation amount is one of the fixed parameters, and is set
for each axis using a peripheral device.
The setting range differs according to whether mm, inch, degree, or pulse units
are used, as shown below.
(a) Millimeter units
• 0 to 6553.5
(Backlash compensation amount)
• 0 ≤
(b) Inch or Degree Units
• 0 to 0.65535
(Backlash compensation amount)
• 0 ≤
(c) Pulse Units
• 0 to 65535
(Backlash compensation amount) ×(Pulses per rotation)
• 0 ≤
search engine
Backlash compensation
amount
Figure 8. . . . 2 Backlash Compensation Amount
(Travel value per pulse)
(Travel value per pulse)
(Travel value per rotation)
8 − 6
Feed screw
Workpiece
≤ 65535(PLS)
(Decimal fraction rounded down.)
≤ 65535(PLS)
(Decimal fraction rounded down.)
≤ 65535(PLS)
(Decimal fraction rounded down.)