Getting Start; C Ha Pte R 6 G E Tting Sta Rt; Overview; What You Can Do In This Chapter - ZyXEL Communications GS1900 Series User Manual

6.1 O ve rvie w
Use the
G e tting Sta rt
6.1.1 Wha t Yo u C a n Do in this C ha pte r
The main
G e tting Sta rt
system status, system resource usage, and interface status. You can also display other status screens for
more information.
6.2 G e tting Sta rt
This screen is the first thing you see when you log into the Switch. It also appears every time you click the
G e tting Sta rt
status, system resource usage, and interface status in widgets.

Getting Start

Fig ure 55
The following table describes the labels in this screen.
Table 12 Getting Start
L ABEL
Refresh Interval (A)
Virtual Device
Wizard
screens to check status information about the Switch.
screen (Section 6.2 on page
icon in the navigation panel. The
DESC RIPT IO N
Use the drop-box to select: None, 5 seconds, 10 seconds, 15 seconds, 20 seconds, 25
seconds, or 30 seconds.
Displays an image of the Switch.
Displays the following links: Start up, VLAN, QoS, and Link aggregation.
GS1900 Series User's Guide
C
HA PTER
G e tting Sta rt
54) displays the Switch's general device information,
displays general device information, system
G e tting Sta rt
54
6
A