Table of Contents
Advertisement
Operating instructions
4.3.2 Emptying, internal machine rinsing
Position of cleaned components after washing
Machines without a drain pump
When the machine is switched off, the number of baskets washed is displayed for
around 5 seconds.
Two horizontal dashes "--" are then shown in the display for 3 minutes. At this
point the machine is still live and emptying and internal rinse cleaning must take
place within this period. The machine then switches off automatically.
•
Open the hood.
•
Press button 0/1 (9).
•
Remove the filters (12) and drain the washing tank by removing the level
pipe (13).
•
Close the hood.
•
Press P3 (8). The display (2) shows "SC" and the internal cleaning process
starts. The display (4) shows the remaining cleaning time. When the
cleaning process is finished, both the displays show two horizontal dashes
"--".
•
Open the hood.
•
Check that the washing and rinsing nozzles (10, 18) are clean and that no
objects have fallen and lodged in the machine.
•
Remove and clean the pump filter (16), the chemical washing filters (12)
and the level pipe (13).
•
Store the cleaned parts in a washing basket. Make sure that the rubber
sleeve (14) on the level pipe does not become deformed, by allowing it to
hang free.
WD-8
44
Rev. 4.0 (202202)
Advertisement
Table of Contents
