Washing - Wexiodisk WD-8 Installation And User Manual

Operating instructions

4.2.4 Washing

Make sure that the items are in a position where they cannot move out of the
washing basket during the washing and rinsing phases.
•
•
•
•
•
•
•
•
•
•
P0 is a pause mode and is used in the case of prolonged intervals between
washes in order to maintain the tank temperature. The hood must be closed. The
machine does not start in P0 mode.
•
•
•
Washing (PPE )(option)
When the machine is in PPE mode, all wash programmes restart three (3) times
in a row which enables longer wash programmes and for each wash cycle
sequence to have three rinses.
WD-8
Remove large pieces of food by rinsing the dishes with a hand shower. The
water in the hand shower must not exceed 40°C. Place the items to be
washed in the basket.
Open the hood.
Put the lever (19) in the correct position for the items currently in the basket:
- is for normally soiled and + for heavily soiled dishware.
Select the programme. Slide the basket into the machine. If the machine is
fitted with "autostart", the hood closes automatically and washing starts
after the basket has been slid in.
Close the hood. The machine starts washing using the selected
programme. The display (4) now shows the remaining washing time for the
programme.
The symbol (1) is lit during the washing phase.
Once the rinsing phase starts, the symbol (3) lights up. If the final rinse
water has not reached the correct rinse temperature once rinsing starts, the
symbol (3) flashes and the machine continues washing until the rinsing
water has reached the correct temperature.
Do not open the hood until the programme has finished.
If the hood is opened during the washing cycle, the machine will stop. If the
hood is closed again, the programme will start from the beginning.
When the machine has stopped, the selected programme appears on the
display (4) and the hood opens automatically if the machine has an
automatic hood. Remove the washed items and allow them to dry.
Press the programme button for the current programme once. "P0"
appears on the display (4).
Press the button again to return to the current programme.
The hood must be opened and closed between each washing cycle.
39
Rev. 4.0 (202202)