Table of Contents
Advertisement
Operating instructions
4.3.2 Emptying, internal machine rinsing
Position of cleaned components after washing
Machines without a drain pump
•
•
•
•
•
•
•
•
•
•
Machines with a drain pump (option)
N.B.! The hood must be open when the drain pump is running.
•
•
•
•
•
•
•
•
•
WD-6C
Turn the knob (8) to position 0.
Remove the tank filters (9) from the machine.
Empty the water from the machine by removing the level pipe (10).
Close the hood and turn the knob (8) to position (6). The internal rinsing
process starts. Turn the knob (8) to position 0 after approximately 25
seconds.
Open the hood and check that the washing and rinsing nozzles (12, 13) are
clean.
Check that no objects have lodged in the machine.
Clean the tank filters (9) and the level pipe (10).
Remove and clean the pump filter (11).
Store the cleaned parts in a washing basket. Ensure that the rubber seal
(10) on the level pipe does not become deformed, by allowing it to hang
freely.
Leave the hood open until the machine is next used.
Turn the knob (7) to position 0.
Open the hood. Remove the tank filters (11) and the level pipe (12). Leave
the hood open.
Turn the knob (7) in the direction of the symbol (6), wait for approximately
3 seconds, continue to the symbol (9) and hold in position until the drain
pump starts and empties the water in the washing tank into the drain. The
drain pump stops automatically after 2 minutes and 20 seconds.
Check that no objects have fallen and lodged in the machine.
Close the hood and turn the knob (7) first to position 0 and then to position
(6). The internal rinsing process starts.
After around 30 seconds, open the hood and turn the knob (7) towards the
symbol (6), wait for approximately 3 seconds and then continue to symbol
(9) in order to empty the rinsing water out of the machine. Then reset the
knob to position 0.
Check that the wash and rinse nozzles (15, 10) are clean.
Remove and clean the pump filter (14) and drain filter (13). Clean the tank
filters (11) and the level pipe (12).
Store the cleaned parts in a washing basket. Ensure that the rubber seal
on the level pipe does not become deformed, by allowing it to hang freely.
35
Rev. 7.0 (202202)
Advertisement
Table of Contents
