Table of Contents
Advertisement
General instructions
1.1 Symbols used
This symbol warns of situations where a safety risk may arise. The instructions
given should be followed in order to prevent injury and dangerous situations.
This symbol on a machine part warns of electrical equipment. The machine must
be entirely non-live during servicing, turn off the power at the power switch and if
required, the switch should be locked to prevent unintentional operation. The
component may only be removed by a qualified electrician.
This symbol warns that the machine's electronics are sensitive to electrostatic
discharge (ESD), which is why a static electricity wristband must be used when
handling the electronics at all times.
This symbol explains the right way to perform a task in order to prevent poor
results and/or damage to the machine.
This symbol identifies recommendations and hints to help you get the best results
when washing, to increase the machine's lifespan and reduce the risk of
emergency shutdown.
This symbol explains the importance of careful and regular cleaning of the
machine to meet hygiene requirements.
This symbol warns of the importance to read the manual before using the
machine.
This symbol warns that local regulations must be followed for recycling of
packaging etc. as well as the destruction of the machine.
This symbol shows where any earth cable for potential equalisation can be
connected. The earth bolt is placed on the machine's stand.
WD-8
2
Rev. 4.0 (202202)
Advertisement
Table of Contents
