Selecting A Programme - Wexiodisk WD-8 Installation And User Manual

Operating instructions

4.2.2 Selecting a programme

The machine can be set to two wash modes. - = normal wash or + = heavily soiled
wash. A lever (19) inside the machine is used to adjust the setting.
•
•
•
The control panel has three programme buttons: P1, P2 and P3.
•
•
•
The washing temperature and chemical washing time for each programme is set
on delivery. The operator can change these values if required.
PPE (option)
Sign on machines in PPE mode
When washing gas cylinders, heavily soiled loads should be selected.
WD-8
When washing pans and very deep items, the heavily soiled programme
should be selected.
When the heavily soiled programme is selected, there is increased
washing pressure from the lower washing arm.
Depending on the items to be washed, the grid shelf (20) may need to be
folded down. (option)
P1=Lightly soiled items (e.g. trays and glassware)
P2=Normal load
P3=Heavily soiled items
36
Rev. 4.0 (202202)