Emptying, Internal Machine Rinsing - Wexiodisk WD-6 Installation And User Manual

Operating instructions

4.3.2 Emptying, internal machine rinsing

Position of cleaned components after washing
Machines without a drain pump
When the machine is switched off, the number of baskets washed is displayed for
around 5 seconds.
Two horizontal dashes "--" are then shown in the display for 3 minutes. At this
point the machine is still live and emptying and internal cleaning must take place
within this period. The machine then switches off automatically.
•
•
•
•
•
WD-6
Open the hood. Press button 0/1 (9). Take out the filters (12). Drain the
washing tank by removing the level pipe (13).
Close the hood. Press P3 (8). The display (2) shows "SC" and the internal
cleaning process starts. The other display (4) shows the remaining clean-
ing time. When the cleaning process is finished, both the displays show two
horizontal dashes "--".
Open the hood. Check that the washing and rinsing nozzles (10, 18) are
clean and that no objects have fallen and lodged in the machine.
Remove and clean the pump filter (16), the chemical washing filters (12)
and the level pipe (13).
Store the cleaned parts in a washing basket. Make sure that the rubber
sleeve (14) on the level pipe does not become deformed, by allowing it to
hang free.
45
Rev. 6.0 (201902)