Table of Contents
Advertisement
Operating instructions
PROBLEM
The machine is not cleaning
properly.
The dishware has tipped over in
the baskets.
Dishware does not dry.
When you contact service personnel, you will need to provide the following
information:
•
•
•
•
WD-8
CAUSE
The rinse and wash nozzles are
clogged with dirt.
There is too little detergent.
The water in the tank is too dirty.
Foam forming in the tank.
Programme with too short a washing
time selected.
Dirt has dried on the dishware to be
washed.
The dishware is incorrectly
positioned in the baskets.
Detergent and drying agent of
another make than usual are used.
The dishware is incorrectly
positioned in the baskets.
Light dishware need washing.
The rinse nozzles are blocked.
Too little rinsing agent.
The washed items have been left in
the machine.
Machine type and model.
Machine serial number and date when the machine was installed.
A brief description of the problem. Are any fault codes shown in the
display?
What happened/was being done immediately before the fault occurred?
50
Rev. 4.0 (202202)
ACTION
Check and clean the nozzles.
Check the amount of detergent. The
hose ("thick") must be submerged in
liquid and the filter in the hose must
be clean.
Change the water.
Check that the washing temperature
is not too low and that the correct
detergent is being used.
Choose a wash programme with a
longer washing time.
Soak the dishware before washing.
Use the correct type of washing
basket and accessories to ensure
that the dishware is correctly
positioned.
Use the same make and type as
before. Rinse the hoses and pumps
with water if necessary.
Put the dishware in the correct
position.
Use a net grid to hold the items.
Check and clean the nozzles.
Check the amount of rinsing agent.
The hose ("thin") must be
submerged in liquid and the filter in
the hose must be clean.
Remove the washed items once the
programme has ended.
Advertisement
Table of Contents
