Daily Cleaning - Wexiodisk WD-8 Installation And User Manual

Operating instructions
Machines with a drain pump
When the machine is switched off, the number of baskets washed is displayed for
around 5 seconds.
Two horizontal dashes "--" are then shown in the display for 3 minutes. At this
point the machine is still live and emptying and internal rinse cleaning must take
place within this period. The machine then switches off automatically.
•
•
•
•
•
•
•
•
•
•

4.3.3 Daily cleaning

Internally
The interior of the machine will be rinsed clean when the machine is switched off
in accordance with the manual.
Externally
Wipe the outside of the machine with a soft, damp cloth.
•
•
WD-8
Open the hood.
Remove the filters (12) and level pipe (13).
Press button 0/1 (9).
Press P1 (6). "dP" appears on the display (2) and the drain pump starts. It
stops automatically after a set period.
Once the machine has been emptied, close the hood.
Press P3 (8). The display (2) shows "SC" and the internal cleaning process
starts. The display (4) shows the remaining cleaning time. After the
cleaning process has finished and the water has been emptied out, both
the displays show two horizontal dashes "--".
Open the hood.
Check that the washing and rinsing nozzles (10, 18) are clean and that no
objects have fallen and lodged in the machine.
Remove and clean the pump filter (16), the chemical washing filters (12),
the level pipe (13) and the drain filter (15).
Store the cleaned parts in a washing basket. Make sure that the rubber
sleeve (14) on the level pipe does not become deformed, by allowing it to
hang free.
If detergent is used, it must not contain abrasives. Detergents containing
abrasives will damage the stainless steel panels.
The exterior of the machine must not be hosed. Water can enter the
machine and damage the control panel and electrical equipment.
45
Rev. 4.0 (202202)