Parameter Overview Analog Output - Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual

I/O device analog input/analog output
10.2 I/O device analog output
Technical specifications
• Between 1L+, channels and all other circuit ele­
ments
• Between channels
• Between Ethernet and all other circuit elements Yes
See also
Response times for analog input device and output device (Page 259)
10.2.2

Parameter overview analog output

Parameters for analog output 4 AO U/I 4xM12 (6ES7145-6HD00-0AB0)
Parameters
Group diagnostics
Diagnostics, missing 1L+
Diagnostics, sensor supply
short-circuit
Response to CPU/Master
STOP
Type of output
Output range
Diagnostics, wire break at
outputs
Diagnostics, short-circuit at
outputs
Diagnostics, overload
Substitute value
194
No
No
Range of values
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
• Output has no current or
voltage
• Retain last value
• Switch to substitute val­
ues
• Disabled
• Voltage
• Current
• 1 to 5 V
• 0 to 10 V
• ±10 V
• 0 to 20 mA
• 4 to 20 mA
• ±20 mA
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
Each value in the nominal
range, overrange, and
underrange
Default setting Range of effective­
ness
Disable Device
Disable Device
Disable Device
Output has no current Device
or voltage
Voltage Channel
±10 V Channel
Disable Channel
Disable Channel
Disable Channel
0 Channel
Operating Instructions, 06/2022, A5E01250250-AN
ET 200eco PN