Further components of ET 200eco PN
Component
Terminal block
Voltage distribut
or
Mounting rail
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
Function
You can connect up to 10 A per voltage
to the terminal block for distribution to
the I/O devices. A maximum of 4 A per
voltage is available short-circuit protected
for each I/O device.
You can supply up to 8 A per voltage at
the PD DC 24V 1×7/8" 4×M12 and distrib
ute up to 4 A per voltage and connector
short-circuit-protected through 4 con
nectors.
You can install several I/O devices on the
mounting rail.
Product overview
1.2 ET 200eco PN Distributed I/O Device
Figure
①
LEDs for forwarding 1L/2L
②
LEDs for forwarding 1L/2L
③
X05: Status of voltage supply
④
X01 ... X04: Loop through of the
voltage
19