Pin Assignment Of Digital Inputs - Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual

PROFINET IO
Modules with PROFINET interfaces may only be operated when all connected nodes are sup­
plied with SELV/PELV voltages.
3.6.3

Pin assignment of digital inputs

I/O device 8 DI DC 24V 4×M12 (6ES7141-6BF00-0AB0)
You will find the pin assignment for the 8 DI DC 24V 4×M12 I/O device in the table below.
Table 3-4 Pin assignment of the M12 cable connector for the 8 DI DC 24V 4×M12 I/O device
Pin
1
2
3
4
5
When using the Y cable, pin 2 and pin 4 are assigned to pin 4 (A) and pin 4 (B).
I/O device 8 DI DC 24V 8×M12 (6ES7141-6BG00-0AB0)
You will find the pin assignment for the 8 DI DC 24V 8×M12 I/O device in the table below.
Table 3-5 Pin assignment of the M12 cable connector for the 8 DI DC 24V 8×M12 I/O device
Pin
1
2
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
CAUTION
Assignment of X1 to X4
24 V sensor supply 1U
(derived from 1L+ non-switched)
Input signal DI : Connector X1
4
Input signal DI : Connector X2
5
Input signal DI : Connector X3
6
Input signal DI : Connector X4
7
Sensor supply ground 1M
Input signal DI : Connector X1
0
Input signal DI : Connector X2
1
Input signal DI : Connector X3
2
Input signal DI : Connector X4
3
Functional earth FE
Assignment of X1 to X8
24 V sensor supply 1U
(derived from 1L+ non-switched)
Not used
S
S
3.6 Pin assignment of connectors
View of the cable connector
(wiring side)
View of the cable connector
(wiring side)
Wiring
41