Table of Contents
Advertisement
864-5091.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • Revision 06
18.9
Overview of busbar covers
ATTENTION
If covers are removed from the switchgear assembly, please ensure that the correct cover type
is mounted again.
➭ If necessary, mark cover type.
NOTE
Mounting direction of post insulator cover
➭ The post insulator cover is marked with the designation "Front". The marking must always
point towards the front of the switchgear when the cover is mounted.
➭ Observe the mounting position of the post insulator cover.
Fig. 29:
Standard cover
(rear view)
Fig. 31:
Post insulator cover
(rear view)
Fig. 33:
Bursting disc
(rear view)
Fig. 30:
Desiccant cover
(rear view)
Fig. 32:
Post insulator cover with desiccant
(rear view)
Fig. 34:
Bursting disc
(front view)
Description
49/214
Advertisement
Table of Contents
