General Technical Data; Standards And Certifications - Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual

General technical data

8.1

Standards and certifications

Introduction
The ET 200eco PN distributed I/O system satisfies the requirements and criteria of
IEC 61131-2.
NOTE
Information on the nameplate
You will find the currently valid labels and approvals on the type plate of the respective
product.
PROFINET IO
PROFINET IO is an open transmission protocol with real-time functionality defined in
PROFINET.
CE marking
Our products fulfill the requirements and safety objectives of the following EU Directives and
comply with the harmonized European standards (EN) published for programmable logic
controllers in the official journals of the European Union:
• 2014/30/EU "Electromagnetic compatibility" (EMC Guidelines)
• 2014/34/EU "Equipment and protective systems for use in hazardous areas" (Explosion
protection directive)
• EU Directive 2011/65/EU "Restriction of the use of certain hazardous substances in
electrical and electronic devices" (RoHS Directive)
The EU Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens AG
Digital Industries
Factory Automation
DI FA TI COS TT
P.O. Box 1963
D-92209 Amberg
These files are also available for download on the Customer Support Internet pages, under
"Declaration of Conformity".
92
Operating Instructions, 06/2022, A5E01250250-AN
8
ET 200eco PN