I/O Device 8 Do Dc 24 V/0.5A 4Xm12 - Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual

I/O device digital inputs/digital outputs
9.2 I/O device digital outputs
Technical specifications
Short-circuit protection of the output
• Response threshold
* Make allowances for the maximum total current when configuring the module.
9.2.2

I/O device 8 DO DC 24 V/0.5A 4xM12

Article number
6ES7142-6BF50-0AB0
Properties
The 8 DO DC 24V/0,5A 4×M12 I/O device has the following properties:
• 8 digital outputs
• Dimensions 30 x 200 mm, dual assignment of the sockets
• Output current: 0.5 A per output
• Rated load voltage DC 24 V
• Suitable for solenoid valves, DC contactors, and indicator lights
• Diagnostics
– "Missing 1L+ or 2L+" for the I/O device
– "Wire break at outputs" per channel
– "Short-circuit to M at outputs" per channel
• Parameterizable response to CPU/Master STOP
• Prioritized startup
• Media redundancy
Pin assignment of the sockets
The table below shows the pin assignment of the four sockets for connecting digital outputs.
Table 9-5 Pin assignment of sockets X1 to X4 for digital outputs
Pin
Socket X1
1
2
DQ
4
3
4
DQ
0
5
126
Assignment
Socket X2 Socket X3
Not used
Output signal
DQ
5
Ground 2M
Output signal
DQ
1
Functional earth FE
Yes, electronic
Typ. 1.8 A (per channel)
Socket X4
DQ DQ
6
DQ DQ
2
Operating Instructions, 06/2022, A5E01250250-AN
View of socket
(front view)
7
3
ET 200eco PN