Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual page 191

I/O device analog input/analog output
10.2 I/O device analog output
Technical specifications
Number of actuator supplies
Total current
Short-circuit protection
• Response threshold
Actuator selection data
Output ranges (Rated value)
Voltage
Current
Load resistance (in the Rated range of the output)
• For voltage outputs
• For voltage outputs, capacitive load
• For current outputs
• For current outputs, inductive load
Permissible input voltage at the output (destruction
limit)
Connection of actuators
• For voltage output, 2-wire connection
• For current output, 2-wire connection
Formation of analog values
Conversion principle
• Conversion time per channel, in ms
• Voltage resolution (including overrange)
• Current resolution (including overrange)
Settling time
• For resistive load
• For capacitive load
• For inductive load
Ability to switch to substitute values
Interference suppression, error limits
Crosstalk between outputs
192
4
Max. 1 A
Yes, electronic
Min. 1.4 A
±10 V
1 V to 5 V
0 V to 10 V
±20 mA
4 to 20 mA
0 to 20 mA
Min. 1 kΩ
Max. 1 μF
Max. 0.6 kΩ
Max. 1 mH
28.8 V continuous, 35 V for 500 ms
Yes
Yes
Resistor network
1 ms
±10 V/15 bits + sign
1 to 5 V/15 bits
0 to 10 V/15 bits
±20 mA/15 bits + sign
4 to 20 mA/15 bits
0 to 20 mA/15 bits
U I
1.3 ms 2 ms
1.8 ms -
- 2 ms
Yes
Min. 70 dB
Operating Instructions, 06/2022, A5E01250250-AN
ET 200eco PN