Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual page 15

Product overview
1.2 ET 200eco PN Distributed I/O Device
Table 1-3 Components of ET 200eco PN (60 mm)
Component
I/O device
SF/MT LED
①
② BF LED
ON LED
③
P1 LK LED
④
P2 LK LED
⑤
Channel status/channel fault
⑥
What is an IO-Link Master?
IO-Link is a point-to-point connection to conventional and intelligent sensors/actuators via
unshielded standard cable in proven 3- or 5-conductor technology. IO-Link Masters are
backwards compatible with all DI standard sensors. Switching state and data channel
designed in proven 24 VDC technology.
16
Function
You connect the sensors and actuators to
the I/O device. The I/O device is available
in the following variants:
• 4 AO U/I 4×M12
Figure
X03: Voltage infeed
⑦
⑧ X02: Loop through of the voltage
Input/output signal
⑨
MAC address
⑩
X01 P2 R LAN: PROFINET IO connection
⑪
X01 P1 R LAN: PROFINET IO connection
⑫
Operating Instructions, 06/2022, A5E01250250-AN
ET 200eco PN