installation
Horizontal Terminations - Rigid/Flex Pipe 127mm x 203mm
The diagrams below show examples of horizontal termination arrangements using one, two, or three 90
1. A maximum of three 90
elbows are permitted.
o
2. Minimum distance between elbows is 305mm.
•
Maintain clearances to combustibles as listed in the "Clearances" section.
•
Horizontal vent must be supported every 0.9 meters.
•
Firestops are required at each floor level and whenever passing through a wall.
•
Must use optional rigid pipe adaptor (Part# 770-994) when using rigid pipe vent systems.
•
A vent guard should be used whenever the termination is lower than the specified minimum or as per local codes.
•
Flex system can only be used up to 3 meters - otherwise rigid venting must be used.
Horizontal Venting with Two (2) 90
One 90
elbow = Two 45
elbows.
o
o
Option
V
A)
0.3 m Min.
0.6 m Max.
B)
0.6 m Min.
1.2 m Max.
C)
0.9 m Min.
1.5 m Max.
D)
1.2 m Min.
1.8 m Max.
E)
1.5 m Min.
2.1 m Max.
F)
1.8 m Min.
2.4 m Max.
Restrictor Set 0 - Factory Setting
Horizontal Venting with Three (3) 90
One 90
elbow = Two 45
elbows.
o
o
Option
V
A)
0.3 m Min.
0.3 m Max.
B)
0.3 m Min.
0.6 m Max.
C)
0.6 m Min.
0.6 m Max.
D)
0.9 m Min.
0.6 m Max.
E)
1.2 m Min.
0.9 m Max.
F)
1.5 m Min.
1.2 m Max.
G)
1.8 m Min.
1.5 m Max.
H)
2.1 m Min.
1.8 m Max.
Restrictor Set 0 - Factory Setting
| City Series ACV60E
46
Elbows
o
H + H1
With these options, maxi-
mum total pipe length is
9.1 m with maximum 2.4
m total horizontal.
Please note minimum
0.3m between 90
is required.
Elbows
o
H
V + V1
H + H1
0.9 m Min.
0.6 m Max.
0.6 m Min.
0.9 m Max.
1.5 m Min.
1.2 m Max.
2.1 m Min.
1.5 m Max.
2.7 m Min.
1.8 m Max.
3 m Min.
2.1 m Max.
3.3 m Min.
2.4 m Max.
3.6 m Min.
2.7 m Max.
H1
elbows
o
With these op-
tions, max total
pipe length is
9.1 m with max
2.7 m total hori-
zontal.
Please note
min.
0.3 me-
ters between
90
elbows is
o
required.
elbows (two 45
elbows equal one 90
o
o
H1
H
V1
elbow).
o
V
V