Summary of Contents for Regency Fireplace Products Albany
Page 1
Owners & Installation Albany F200B-2 Freestanding Wood Fire Model: F200B-2 PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information consult an authorised installer, service agency or the distributor.
Page 2
• Oil Based woods • Coal • Garbage • Cardboard • Solvents • Colored Paper • Trash ONLY CLEAN APPLIANCE WITH A DAMP CLOTH (NEVER WHEN UNIT IS HOT) DO NOT USE ANY ABRASIVE CLEANERS Regency Albany Freestanding Wood Fire...
Jan. 6/14: Rev. A:Updated address and dates of manufacture Apr. 15/15 Rev. B - Updated data as per Matt M May 21/15: Rev. C - New test results updates (-2 model) Sept. 25/17: Rev. d--Updated manufacturing date Regency Albany Freestanding Wood Fire...
Too short a flue can cause 9) Do not connect this unit to a flue serving difficult start-up, dirty glass, backsmoking another appliance. when door is open, and Regency Albany Freestanding Wood Fire...
NOTE: Installation must be carried out by a licensed installer in accordance with AS/NZS 2918:2001. NOTE: A minimum clearance of 100mm (flat wall) or 75mm (corner wall) must be retained for all wall surfaces to allow for fan access and maintenance. Regency Albany Freestanding Wood Fire...
5) Once a bed of coals has been established on the base of the firebox, you may adjust the draft control to a low setting to operate the unit at its most efficient mode. Regency Albany Freestanding Wood Fire...
Note : Thermodisc (temp. switch) in the fan control circuit. Heater/ Thermodisc must come up to operating temperature for fan to operate. See page 8 Regency Albany Freestanding Wood Fire...
(1) The catalytic converter must not have been mechanically abused (2) Only recommended fuels have been used in the appliance Revision Date: December 2016 Regency Wood Products Warranty Regency Albany Freestanding Wood Fire...
Page 13
Unit must be installed according to all manufacturers’ instructions as per the manual. All Local and National required codes must be met. The installer is responsible to ensure the unit is operating as designed at the time of installation. Revision Date: December 2016 Regency Wood Products Warranty Regency Albany Freestanding Wood Fire...
Page 14
Products made or provided by other manufacturers and used in conjunction with the FPI appliance without prior authorisation from FPI may void this warranty. INCORRECT INSTALLATION IS NOT COVERED BY WARRANTY. A SERVICE OR CALLOUT FEE WILL BE CHARGED IN THESE CIRCUMSTANCES. Revision Date: November 2016 Regency Wood Products Warranty Regency Albany Freestanding Wood Fire...
Page 15
(b) Loss means any expense, cost or damage of any kind and includes Consequential Loss and a fine or penalty imposed by a statutory or other authority. Revision Date: December 2016 Regency Wood Products Warranty Regency Albany Freestanding Wood Fire...
Page 16
To provide the best support for your product, we request that you complete a product registration form at http://www.regency-fire.com.au/Customer-Care/Warranty-Registration.aspx within ninety (90) days of purchase. Revision Date: November 2016 Regency Outdoor Products Warranty Regency Albany Freestanding Wood Fire...
Page 17
For fireplace care and tips and answers to most common questions please visit our Customer Care section on our Web Site. Please feel free to contact your selling dealer if you have any questions about your Regency product. Regency Albany Freestanding Wood Fire...
Need help?
Do you have a question about the Albany and is the answer not in the manual?
Questions and answers