Locating Your Gas Fireplace - Regency Fireplace Products City ACV60E Owners & Installation Manual

Locating Your Gas Fireplace

1. When selecting a location for your fireplace,
Locating Your
ensure that the clearances are met.
Gas Fireplace
2. The appliance must be installed on a flat, solid,
1. When selecting a location for your fireplace,
continuous surface. For example, a wood, metal,
ensure that the clearances are met.
or concrete floor, or in a raised (on the wall)
2. The appliance must be installed on a flat, solid,
application. The appliance must be installed
continuous surface For example a wood, metal
on a metal or wood panel extending the width
or concrete floor or in a raised (on the wall) ap-
and depth of the appliance.
plication. The appliance must be installed on
a metal or wood panel extending the full width
and depth of the appliance.
3. The ACV60E direct vent gas fireplace can be
installed in a recessed position or framed out
3. The CV60E Direct Vent Gas Fireplace can be
into the room as in A, B, C, and D. See Diagram
installed in a recessed position or framed out
into the room as in A, B, C, and D.
1.
See Diagram 1.
Diagram 1
Diagram 1
A) Flat on wall
A) Flat on Wall-CV60E
B) Flat on wall corner
B) Flat on Wall Corner-CV60E
C) Recessed into wall/alcove
C) Recessed into Wall/Alcove-CV60E
D) Corner
D) Corner-CV60E
4. For bedroom installations, check with local
4. For bedroom installations, check with local
codes before installation. This appliance is
codes before installation. This appliance is
o ered with a remote control.
offered with a remote control.
5. The CV60E Direct Vent Gas Fireplace is ap-
proved for alcove installations, see "Clearances"
5. The ACV60E direct vent gas fireplace is ap-
section for details.
proved for alcove installations. See "Clear-
ances" section for details.
6. We recommend that you plan your installa -
tion on paper using exact measurements for
clearances and floor protection before actually
6. We recommend that you plan your installa-
installing this appliance. Have an authorized
tion on paper using exact measurements for
inspector, dealer, or installer review your plans
clearances and floor protection, and have an
before installation.
authorized inspector, dealer, or installer review
Note:
For vent terminations refer to "Exterior Vent
your plans before beginning.
Termination Locations" section.
Note: For vent terminations, refer to "Exterior Vent
Termination Locations" section.
installer's information
requirements
installer's information
City Series ACV60E | 23