Table of Contents
Advertisement
Wiring Diagram
No electrical power supply is required for the gas
control to operate. 240 Volt AC power is needed
for the lights.
Electrical power must be brought to the appliance
by a licensed electrician.
CAUTION: Label all wires prior to disconnection when servicing controls.
Wiring errors can cause improper and dangerous operation.
This appliance is equipped with a three-prong (earthing) plug for your
protection against shock hazard and should be plugged directly into a
properly grounded three-prong receptacle. Do not cut or remove the earth-
ing prong from this plug.
(Do not cut the earth terminal off under any
circumstances.)
BLACK
BATTERY
CONNECTION
installation
Caution: Ensure that the wires do not
touch any hot surfaces and are away from
sharp edges.
EARTH
BLUE
VARIABLE
LIGHTS
City Series ACV60E | 55
Advertisement
Table of Contents
