Table of Contents
Advertisement
installation
Rigid Pipe Venting Systems -
Rigid Pipe Vent Systems offer a complete line of component parts for installation of both horizontal and vertical installations. Many items are offered in decora-
tive black, as well as galvanized finish.
The minimum components required for a basic
Horizontal Termination are:
1
AstroCap XL Termination Cap
1
90
Elbow
o
1
Rigid Pipe Adaptor
1
Wall Thimble
1
Length of rigid pipe to suit wall thickness
The minimum components required for a basic
Vertical Termination are:
1
Vertical Termination Cap
1
Rigid Pipe Adaptor
1
Lengths of pipe to adequately
penetrate roof
1
Ceiling Firestop
1
Flashing
1
Storm Collar
Wall thickness is measured from the back standoffs
to the inside mounting surface of termination cap. For
siding other than vinyl, furring strips may be used,
instead of a vinyl siding standoff, to create a level
surface to mount the vent terminal. The Terminal
must not be recessed into siding. Measure the wall
thickness including furring strips.
If a Vinyl Siding Standoff is required (it must be
used with vinyl siding), measure to outside surface
of wall without siding and add 2 inches.
WARNING:
Do not combine venting components from
different venting systems.
Exception: However, use of the AstroCap XL
termination cap is acceptable with all systems.
This product has been evaluated by Intertek for
using a Rigid Pipe Adaptor in conjunction with
Simpson DV Pro, Metal-Fab Sure-Seal, ICC
Excel and Selkirk Direct-Temp systems. Use
of these systems with the Rigid Pipe adaptor
is deemed acceptable and does not affect the
Warnock Hersey/Intertek listing of components.
The FPI AstroCap XL
is certified for installations using FPI venting systems as well as Simpson Dura-Vent
TM
AstroCap XL
is a proprietary trademark of FPI Fireplace Products International Ltd. Dura-Vent® and Direct Vent are registered and/or proprietary trademarks of
TM
Simpson Dura-Vent Co. Inc.
28
Regency Horizon ® HZ54E-11 Gas Fireplace
|
Basic Horizontal & Vertical Terminations
Alternate Horizontal
Termination Caps
TM
Alternate Snorkel
Termination Cap
Vertical Terminal
Storm Collar
Flashing
Ceiling Firestop
Pipe Length
Pipe
Length
Pipe Length
o
90 Elbow
Rigid Pipe
Adaptor (770-994)
®
Vinyl Siding
Standoff (Optional)
Vent Guard - if required*
(Part #946-506/P)
AstroCap XL
Termination Cap
(Part #946-623/P)
Wall Thimble
(Mandatory in all
Horizontal Terminations)
When using Rigid Vent other than
Simpson Dura-Vent, 3 screws must be
used to secure rigid pipe to adaptor.
Direct Vent Pro, ICC Excel and Selkirk Direct-Temp.
Advertisement
Table of Contents
