Heartland VALUE Series Assembly Manual page 92

PARTS REQUIRED:
Measure and mark location of hole on outside of right door as shown (Fig. A) .
5
Pre-drill hole with 1/4" drill.
Re-drill hole with 3/8 " drill.
Keep drilled hole square to
trim to avoid breaking edge
of door stiffener.
6
Insert handle in hole and secure with 1-1/4" screws.
Attach inside handle and secure with set screw as shown.
SET
SCREW
FINISH
Your spring bolt, T-handle and decorative hinges are now installed.
DOOR HARDWARE
x1
3/8" (10,9 cm) Drill Bit
1/4" (0,6 cm) Drill Bit
RIGHT DOOR
1-3/4" (4,4 cm)
35-3/4"
(90 cm)
1-1/2" (3,8 cm)
Screws
90
x2
1-1/2" (3,8 cm)
Fig. A
TOP VIEW
1-3/4"
1/4" Pre-drill and
(4,4 cm)
3/8" Drill-through.