Heartland VALUE Series Assembly Manual page 78

PARTS REQUIRED:
x4
VX
2 x 6 x 96" (5,1 x 15,2 x 243,8 cm)
WTC
x2
2 x 6 x 49-3/4" (5,1 x 15,2 x 126,4 cm)
BEGIN
Place WTC eave trim flush along edge of roof panel (Fig. A) and flush to gable trim.
1
Screw through roof panel into trim with 1-1/4" screws spaced evenly in a staggered pattern.
Install VX flush to edge of roof panel and flush to installed eave trim WTC.
2
Screw through roof panel into trim with 1-1/4" screws spaced evenly in a staggered pattern.
Install 2nd VX flush to edge of roof panel and flush to installed eave trim VX.
3
Screw through roof panel into trim with 1-1/4" screws spaced evenly in a staggered pattern.
Install VF flush to edge of roof panel and flush to installed eave trim VX.
4
Screw through roof panel into trim with 1-1/4" screws spaced evenly in a staggered pattern.
**Last trim piece may need to be trimmed to fit**
Fig. A
Flush
3" (7,6 cm)
Screws
VF
48"
(121,9 cm)
96"
(243,9 cm)
VX
Repeat installation on opposite side.
FINISH
Your eave trim is now installed.
12' x 24' EAVE TRIM
x8
VF
x2 VF
2 x 6 x 48" (5,1 x 15,2 x 121,9 cm)
1-1/4" (3,2 cm)
Screws
Evenly Spaced
96"
(243,9 cm)
49-3/4"
VX
(126,4 cm)
3" (7,6 cm)
VF
VX
WTC
76
x94
1-1/4" (3,2 cm)
VX
WTC