Heartland VALUE Series Assembly Manual page 4

❑ Phillips
Screwdriver
❑ Drill / Driver
❑ 3/8" Drill Bit
❑ #2 Philips Drive Bit
❑ Hammer
❑ Level
❑ Pencil
❑ Tape Measure
or
❑ Square
Safety! Always use approved safety glasses during assembly.
Look for these symbols for helpful reminders throughout this manual.
= Assistance Required; two or more people.
= Ensure squareness.
= Important required step or operation.
= Helpful assembly hint.
ORIENT LUMBER AND TRIM FOR BEST APPEARANCE
Framing lumber is graded for structural strength and not appearance. Exterior trim is graded for one good side.
Always install the material leaving the best edge and best surface visible. Please remember that these blemishes in no way
negatively affect the strength or integrity of our product. (See Fig. A, B, C.)
A
TOOLS
Required
❑ Utility Knife
❑ Shingle Blades
❑ Caulk Gun
❑ Paint Tools
❑ Safety Glasses
❑ Ladder
HELPFUL REMINDER SYMBOLS
= Mark part with pencil.
= Beginning of steps for assembly or installation.
BEGIN
= You have finished the assembly or installation.
FINISH
= Level
B
2
Optional
❑ Tool Belt/
Nail Pouch
❑ Tin Snips
(for drip edge)
❑ Chalk Line
❑ Nail Gun
• gun nails
❑ Gloves
❑ Sawsall
C