Heartland VALUE Series Assembly Manual page 53

12x12' 12x16' 12x20' 12x24'
x12 x20
x16 x24
x14 x18 x22 x26
x144 x192 x240 x288
BEGIN
Place two rafter-halves AD in the corner of back and side walls, flush to panels and studs.
1
Flush rafters at peak. Secure gusset to rafters with 2" nails following the pattern shown (FIg. A).
Flush
1/4" 1/4"
(1,9 cm) (1,9 cm)
Fig. A
HINT:
Use floor and walls to help
assemble rafters!
SET ASIDE THESE TWO RAFTER ASSEMBLIES.
Depending on your shed size, build rafters with (2) gussets (Fig. C).
Place two rafter-halves on floor and flush in the corners of wall and RL, as shown in STEP - 1.
2
Flush rafters at peak. Secure gusset to rafters with 2" nails following the pattern shown (FIg. A).
3
Flip over rafter assembly and fasten second gusset to other side with 2" nails (FIg. C).
Fig. B -
Build 2 for all sizes
144"
96"
(365,8 cm)
(243,8 cm)
x2
1-GUSSET RAFTERS
FINISH
Your rafters are now assembled.
Remove RL and screws from floor.
RAFTERS
PARTS REQUIRED:
6 x 24" (15,2 x 60,9 cm)
ADA
2 x 4 x 77-15/16" (5,1 x 10,2 x 198 cm)
2" (5,1 cm)
Build (2) rafter assemblies with (1) gusset (Fig. B).
Temporary support (OO)
x2
x1 RL
144"
(365,8 cm)
Fit base of rafters in corners
of back wall.
Flush at peak
Fig. C
144" 96"
(243,8 cm)
(365,8 cm)
2-GUSSET RAFTERS
12x12' 12x16' 12x20' 12x24'
x5
x7
51
3" (7,6 cm)
Temporary Support
2 x 4 x 24" (5,1 x 10,2 x 61 cm)
x9
x11