Sx-3000 Ip Setup; Imb Network Setup - GDC SX-3000 Installation Manual

8

SX-3000 IP Setup

The IP address of the SOM and the IMB will need to be set for proper operation. The SOM and
the IMB IP are to be on the same subnet.
8.1

IMB Network Setup

To edit the IP addresses of the Ethernet ports, use the following instructions:
1 Enter the SMS screen.
2 Click [Configuration] to access the Configuration page.
3 Select Maintenance access from the top drop down menu. Enter the number password
and select [OK]
4 Select the IMB Network tab
5 Enter the Subnet Mask. As well as the desired IMB IP and SOM IP addresses.
6 Once the settings have been entered, click on [Validate IPs].
SX-3000 Installation Manual
Figure 22 IMB Network settings screen
Page 13 of 43