Operation With Psd-3000U/P; Importing The Raid Array - GDC SX-3000 Installation Manual

Hide thumbs Also See for SX-3000:

Table of Contents

Operation with PSD-3000U/P

7.1

Once the PSD-3000U/P RAID set is connected to the SX-3000 IMB properly the RAID array will

have to be imported in the system. This is done through the Admin panel of the software.

To import the RAID array from the PSD-3000U/P storage unit, please use the following steps:

1. From the Control Panel click on the [Admin Panel]

2. Click [Focus] at the far bottom right of the keyboard, then click the cursor in the

"Password" text box to enter the password configos

3. Select [Storage System Management] (1)

4. Select [Import RAID array] (2)

5. A pop-up window will appear to confirm importing the RAID, select [Yes]

6. Please reboot the server after selecting [Yes] for this to take effect.

SX-3000 Installation Manual

Figure 19 Storage System Management Screen

Figure 20 Import RAID Confirmation

Page 11 of 43

Table of Contents