Projector Connection - GDC SX-3000 Installation Manual

7 If all of the IP addresses are valid, you will get the following pop-screen:
8 Click [OK] to exit.
8.2

Projector Connection

The Ethernet 2 connection and the projector are to be on the same subnet. Since the SX-3000 is
connected directly to the Projector, there is no need to set the IP address for the server to the
projector. The option to set the IP for the projector will be inactive.
SX-3000 Installation Manual
Figure 23 IPs are Valid Confirmation
Figure 24 CineCanvas Page
Page 14 of 43