The Psd-3000U External Hard Drive Unit; Inserting The Individual Raid Drives Into The Bay - GDC SX-3000 Installation Manual

6

The PSD-3000U External Hard Drive Unit

The PSD -3000U hard drive unit features 3 bays. Each PSD-3000U unit is shipped with the
content hard drives separate packaging. The server's content storage hard disks are inserted
into the external hard drive bay. The content storage hard disks must be inserted into the PSD-
3000U and connected the SX-3000 before starting the server.
6.2

Inserting the individual RAID drives into the bay

Ensure that the server is powered off before connecting the external content storage drive.
To insert the drives into the PSD-3000U in each individual bay:
6 Open the hard drive bay by pushing in the
7 Insert the hard drive in to the bay and push in.
8 Push close the handle until it clicks to lock in the drive.
9 Insert each drive into the separate bay of the unit. Figure 7
Note: Each hard drive can be inserted into any drive slot from 1-3. They do not need
to be placed in any particular order.
10 Once the content storage drives has been inserted, and the door is closed in. You can
lock the door by using the plastic key (Figure 8) to push the tab on the front of each
door up. Exposing a red color (Figure 9)
Figure 13 Hard Drive Key
SX-3000 Installation Manual
Figure 12 Inserting the Drives into the PDS-3000U
Page 9 of 43
Figure 14 Door Lock