GDC SX-3000 Installation Manual page 22

c. Arm the marriage. In the Arming window, click the Arm Marriage button (refer
to Figure 34). A 30 second count-down timer begins. The LED in the Marriage
button on the PI Board will flash green during this count-down. You MUST press
the Marriage button on the PI Board within this 30 second window in order for
the marriage to take effect. When the Marriage button is pressed, the LED
button will change to a solid green to indicate a successful marriage.
d. The Finish window states the success of the marriage. Click the Finish button to
return to the Main panel.
2. Clear the Service Door/Marriage Tamper on the server (refer to Section 6.3 / Page 13).
All 3D IMB channels on the Christie Series 2 projector should use the 'IMB' input and '4:4:4
(RGB)' input data format (see Figure 35).
SX-3000 Installation Manual
Figure 34 Arm Marriage and Marriage countdown
Page 21 of 43