Automation Setup; General Automation Setup - GDC SX-3000 Installation Manual

Hide thumbs Also See for SX-3000:

Table of Contents

Automation Setup

The SX-3000 server is able to control external devices using its automation interface. This can be

used to automate repetitive tasks for the cinema operator to prevent user error.

14.1

The following steps describe the general setup of an automation device on the SX-3000 server.

1. Click the power button once to access the Control Panel.

2. Click the following buttons to access the Automation interface

[SMS][Configuration][Maintenance Access]

(enter password)[General][Automation]

Automation event labels and actions can be set up from this interface:



Event Labels are how automation actions can be accessed, for example, they can be

triggered as automation cues from an playlist



The Actions configured with an event label will be executed when an event label is

triggered.

SX-3000 Installation Manual

Figure 46 Automation interface

Page 30 of 43

Table of Contents