Time Zone Setup - GDC SX-3000 Installation Manual

10

Time Zone Setup

The SX-3000 server may or may not arrive with the local time zone set. The following steps show
how to change the time zone on the server.
1. From the SMS screen, click on the [Control Panel] button to access the control panel.
2. From the Control Panel, click [Admin Panel] to access the Admin Panel.
3. Click [Focus] at the far bottom right of the keyboard, then click the cursor in the
"Password" text box to enter the password.
4. Click [Diagnostics/Maintenance][Configure Time Zone] to access the Time zone
Selection Page.
5. Click [Focus] and tap the section above the keypad to bring the pointer into focus.
6. Use [↑] and [↓] to highlight the desired Country.
7. Click [Tab] until the [OK]
8. Repeat Steps 5-7 to select the City/Region.
SX-3000 Installation Manual
Figure 38 Time Zone – Geographic Area Configuration
Figure 39 Time Zone Country/Region Configuration
Page 24 of 43