Series 2 Projector Setup; Barco Series 2 Projector Setup - GDC SX-3000 Installation Manual

Hide thumbs Also See for SX-3000:

Table of Contents

SX-3000 Installation Manual

Series 2 projector setup

To work with the GDC IMB, the projector must be set up according to the requirements of the

projector manufacturer. It is required to use a VGA monitor and USB keyboard and mouse

connected to the IMB in order to setup the connection between the IMB and the projector.

Once the connection is complete the monitor, keyboard, and mouse can be removed and the

SMS can be accessed via VNC from the TMS or projector.

9.1

No system configuration is required for Barco Series 2 projector to work with the GDC IMB. The

Service Door/Marriage Tamper on the server must be cleared before the IMB can be used for

playback.

In order to use the IMB for content playback, the INPUT source of the projector macros must be

set to IMB.

Figure 29 INPUT source settings on Barco Series 2 projector

Page 17 of 43

Table of Contents