GDC SX-3000 Installation Manual page 23

Figure 35 Projector input settings for Christie projectors
9.3.2 3D settings for Christie Series 2 projectors
The 3D macros for Christie Series 2 projectors should be configured with the following settings
for '3D Input Control':
• 3D Sync Input Mode: Use 'Line Interleave' (first line=Left, second line=Right)
• L/R Display Reference: Not Used
• Frame Rate: 6:2
• L/R Display Sequence: Left (L1R1 L2R2)
The settings for 3D output control ( '3D Sync Polarity', 'Dark Time', 'Output Delay' and 'Phase
Delay') should be customized according to the type of 3D system used (RealD, XpanD or
Dolby3D).
SX-3000 Installation Manual
Figure 36 3D macro settings for Christie projectors
Page 22 of 43