Content Ingest Management Setup; Configuring A Content Ingest Source; 11.1.2 Content Ingest From Usb Disk - GDC SX-3000 Installation Manual

Hide thumbs Also See for SX-3000:

Table of Contents

Content Ingest Management Setup

Content ingest management must be set up before the server is able to ingest content. This

section will show the setup for content ingest from two different sources. The same steps can

be used to set up content ingest sources using other methods.

11.1

In order for the SX-3000 to ingest content the ingest source must be configured. The following

sections describe the various types of ingest sources that are used with the SX-3000.

The following steps describe the setup of a source for ingesting content from an external USB

hard drive:

1. From the SMS, click on the [Control Panel] menu.

2. Click [Manage Content] to access the Content Management Page.

3. Click the [Source] tab, followed by the [Add] button. This opens up the Source Setup

Page.

4. Enter the name of the source in the "Source Name..." text box. In this example, we will

be setting up a USB source and naming it "USB". Select "USB 2.0" as the Source Type.

5. Click [Save] to save the settings for the USB content ingest source.

SX-3000 Installation Manual

Figure 40 USB ingest source setup

Page 25 of 43

Table of Contents