Print-Related Commands - Cablescan 512 Instruction Manual

Model 512 Instruction Manual
The following list contains all print-related commands. The printout also will appear on the
monitor during printing, or the monitor only if no printer is connected. Verify the Printer power
switch is on and the Printer Select light is on. At the system prompt, enter the two- letter
command, followed by an ENTER.
Function
Print Error
Print Wire List
Print User List
Print Wire List - PW
Same as PRINT WIRE LIST selected from the Front Panel menu. See section on Controls and
Displays for more details.
Print Error List - PE
Same as ERROR LIST key on the Front Panel. See section on Controls and Displays for more
details.
Print User Notation List - PU
Prints a list of user notations that have been assigned to the scanner test points.
Print Sorted Wire List - PS
Prints a wire list of all continuity assignments in memory. This list is sorted from the sequential
wire list and is stored in ascending order for use during shorts test. The printout is therefore
listed in ascending order, with multiple circuits grouped together.

PRINT-RELATED COMMANDS

Tester
Command
-
-
-
-
-
-
2-letter Command
Description
PE Print Errors
PW
Print Wire List
PU Print User List
PS
Print Sorted
PO Print Options
P
Printer on/off toggle
FF Form Feed
LF Line Feed
SH Set Heading
Page 31