Test Commands - Cablescan 512 Instruction Manual

Model 512 Instruction Manual

TEST COMMANDS

The following commands are related to the testing of opens and shorts, and the self testing of the
Model 512. These are two-letter commands, which are executed by pressing the two letter keys
followed with an ENTER.
Tester
Function
Test
Test Opens
Test Shorts
Loop Test
Self Test
Scan Test - SC
Same as TEST button on Front Panel. A scan is executed on the assembly under test, and each
error (open or short) is displayed. After each error is displayed, testing may be continued by
pressing ENTER. See section on Controls and Displays for more details.
Scan Opens Only - SO
Executes a scan for opens only. Opens are displayed as in TEST mode. After each open is
displayed, testing may be continued by pressing ENTER.
Scan Shorts Only - SS
Executes a scan for shorts only. Shorts are displayed as in TEST mode. After each short is
displayed, testing may be continued by pressing ENTER.
Self Test - TT
Same as SELF TEST selected from the Front Panel menu. See section on Controls and Displays
for more details.
Loop Test - CT
Same as LOOP TEST selected from the Front Panel menu. See section on Controls and Displays
for more details.
2-letter
Command
SC Scan Continuities
SO Scan Opens
SS Scan Shorts
CT Continuous Test
TT Test Tester
Command
Description
Page 29