Print-Related Commands - Cablescan 4000C Instruction Manual

Model 4000C Instruction Manual

Print-Related Commands

The following list contains all print-related commands. The printout also will appear on the
monitor during printing, or the monitor only if no printer is connected. Verify the Printer power
switch is on and the Printer Select light is on. At the system prompt, enter the two- letter
command, followed by an ENTER.
Tester
Function
Print Error
Print Wire List
Print User List
-
-
-
-
-
-
Print Wire List - PW
Same as PRINT WIRE LIST selected from the Front Panel menu. See section on Controls and
Displays for more details.
Print Error List - PE
Same as ERROR LIST key on the Front Panel. See section on Controls and Displays for more
details.
Print User Notation List - PU
Prints a list of user notations that have been assigned to the scanner test points.
Print Sorted Wire List - PS
Prints a wire list of all continuity assignments in memory. This list is sorted from the sequential
wire list and is stored in ascending order for use during shorts test. The printout is therefore
listed in ascending order, with multiple circuits grouped together.
Print Options List - PO
Prints a list of the current user-settable options.
Printer On/Off - P
This command enables the printer to print whatever is typed and what is displayed on the
keyboard/CRT Terminal. This command is primarily a diagnostic function, and in certain modes
of operation it may print non-valid data. To enable the printer, type P followed by an ENTER.
To disable the printer, except for the print functions, type P followed by an ENTER again.
Line Feed - LF
Entering this command will cause the printer to advance one line.
Form Feed - FF
2-letter Command
Command Description
PE Print Errors
PW Print Wire List
PU
Print User List
PS Print Sorted
PO Print Options
P
Printer on/off toggle
FF Form Feed
LF
Line Feed
SH Set Heading
Page 35