Cablescan 512 Instruction Manual page 69

Model 512 Instruction Manual
2. The User Notation Table may contain previous data (as represented by JA-32 in the
previous display). To initialize the list type I, and press ENTER. Type Y to the prompt
"Initialize ?"
3. User Notations should be entered while in the Replace mode. To select the Replace
mode, type R and press ENTER. While in the replace mode, the screen should display an
RU to the left of each new line as it is displayed as shown below:
>
> ED
EDIT (W, U)
EDIT User Notation List
U 0001
I
Initialize? Y
U 0001
R
RU 0001
4. Using the test fixture wire list, enter P1-A, which is the label assigned to test point 1, and
press ENTER.
5. Enter the next nine labels P1-B through P1-L, by typing each label followed by an
ENTER. When all 10 labels have been entered, the screen will be as shown below:
>
> ED
EDIT (W, U)
EDIT User Notation List
U 0001
I
Initialize? Y
U 0001
R
RU 0001
RU 0002
RU 0003
RU 0004
RU 0005
RU 0006
RU 0007
RU 0008
RU 0009
RU 0010
RU 0011
JA-32
JA-32
P1-A
P1-B
P1-C
P1-D
P1-E
P1-F
P1-H
P1-J
P1-K
P1-L
Page 60