Table of Contents
Advertisement
Model 512 Instruction Manual
Setup Sub-Menu
A Setup Sub-Menu provides a number of functions used for changing tester setup parameters.
Since these functions are not frequently used, they are placed in the sub-menu.
To select the Setup Sub-Menu, press the arrow keys until "Setup Sub-Menu" is displayed and
press MENU RUN. The first sub-menu selection is then displayed. To exit the Sub-Menu,
either select Return to Main Menu and press MENU RUN, or press RESET.
SUB-MENU FUNCTIONS
A sub-menu is used for making changes to Tester setup parameters and to format diskettes.
There are nine functions in the sub-menu.
Display Current Time
Set Date
Set Time
Clear Memory
Default System Settings
Set Printer Baud Rate
Display Current Time
The current setting of the internal clock can be displayed to determine whether the clock needs
setting. The display format is as follows:
day
(Mon-Sun)
The time is presented in 24-hour format. To exit this function, press RESET. This function does
not change the time.
Set Date
This function sets the date in the internal clock. When it is selected, the display will read as
follows:
day
(Mon-Sun)
A cursor will be positioned under the day. Pressing an arrow key causes the day to increment or
decrement accordingly. After the day has been set, press MENU RUN and the cursor will move
to the month position. Use the arrow keys to change the month or press MENU RUN to select
the year position. Use the arrow keys to change the year setting or press MENU RUN to
complete the setting process. The display will show "function complete." RESET may be used
to exit without altering the original settings.
Set Terminal Baud Rate
Format Drive 0
Format Drive 1
Print Label Status
Load Printer Label
Return to Main Menu
date
(MM-DD-YY)
(HH:MM:SS)
month
date
(1-12)
(1-31)
time
year
(00-99)
Page 25
Advertisement
Table of Contents
