Cablescan 512 Instruction Manual page 41

Model 512 Instruction Manual Page 32
Print Options List - PO
Prints a list of the current user-settable options.
Printer On/Off - P
This command enables the printer to print whatever is typed and what is displayed on the
keyboard/CRT Terminal. This command is primarily a diagnostic function, and in certain modes
of operation it may print non-valid data. To enable the printer, type P followed by an ENTER.
To disable the printer, except for the print functions, type P followed by an ENTER again.
Line Feed - LF
Entering this command will cause the printer to advance one line.
Form Feed - FF
This command causes the printer to advance to the top of the form. Refer to printer owner's
manual for setting the Top of Form.
Set Heading - SH
This command allows a custom heading to be printed at the top of a printout when a print
command is performed. The print heading can be a character string of up to 79 characters. To
enter the heading, type the SH command, a SPACE, and then the character string, followed by an
ENTER. This heading will be stored with the wire list when a Save function is executed.