Test Commands - Cablescan 64 Instruction Manual

Page 32

TEST COMMANDS

The following commands are related to the testing of opens and shorts, and the self testing of the
Model 64. These are two-letter commands, which are executed by pressing the two letter keys
followed with an ENTER.
Top Panel
Function
Test
Loop Test (Menu)
Self Test (Menu)
Test - SC
Same as TEST button on Top Panel. A scan is executed on the assembly under test, and each
error (open or short) is displayed. After each error is displayed, testing may be continued by
pressing ENTER. See Section on Controls and Displays for more details.
Loop Test - CT
Same as LOOP TEST selected from the Top Panel menu. See section on Controls and Displays
for more details.
Self Test - TT
Same as SELF TEST selected from the Top Panel menu. See section on Controls and Displays
for more details.
2-letter Command Description
Command
SC
CT
TT
Model 64/64x2 Instruction Manual
Scan Continuities
Continuous Test
Test Tester