Nic Ports; Vga Ports; Video Specifications; Usb Specifications - Dell EMC VxFlex Ready Node R840 Manual

NIC ports

VGA ports

Video specifications

Table 23 USB specifications
Front panel
Two USB 2.0-compliant
l
ports
One micro USB 2.0-
l
compliant port for
iDRAC Direct
Note
The micro USB 2.0
compliant port can only
be used as an iDRAC
Direct or a
management port.
One optional USB 3.0-
l
compliant port
The VxFlex Ready Node R840 system supports up to four Network Interface
Controller (NIC) ports that are integrated on the network daughter card (NDC), and
are available in the following configurations:
Four RJ-45 ports, where two ports support maximum of 10 GB and the other two
l
ports a maximum of 1 GB
Two RJ-45 ports that support up to 1 Gbps and 2 SFP+ ports that support up to 10
l
Gbps
Four SFP+ ports that support up to 10 Gbps
l
Two SFP28 ports that support up to 25 Gbps
l
The Video Graphic Array (VGA) port enables you to connect the system to a VGA
display.
The VxFlex Ready Node R840 system supports two 15-pin VGA ports, one each, on
the front and back of the system.
VxFlex Ready Node R840 servers support the integrated Matrox G200eW3 graphics
controller with 16 MB of video frame buffer.
The following table describes the supported video resolution options.
Table 24 Supported video resolution options
Resolution
1024 x 768
Back panel
Two USB 3.0-
l
compliant ports
Refresh rate (Hz)
60
Technical specifications
Internal USB
One internal USB 3.0-
l
compliant port
Color depth (bits)
8, 16, 32
NIC ports
193